Moldex 4601 Airwave (Small) NIOSH N95 Respirator Mask - Made in USA
Free Shipping over $99 to most locations.
Pickup available at Canada Strong
Ready in 30 mins. Pickup hours: Mon-Thurs 8:00am-3:00pm, Fri 8:00-2:00. Excludes observed Ontario stat holidays.
Moldex 4601 Airwave (Small) NIOSH N95 Respirator Mask - Made in USA
Box of 10
Canada Strong
660 Riddell Rd #5
Orangeville ON L9W 5G5
Canada
Made in USA - White AirWave NIOSH N95
This is a Nose Flange version. Moldex doesn't make a white full flange AirWave N95. For Full Flange, see 4151 (M/L blue) or M4621 (M/L black).
The Moldex 4601 is a SMALL disposable Particulate Respirator with NIOSH N95 approval for general use. Key features include
- Wave Design reduces breathing resistance
- FlexFit moves with your face and stays in-place for all-day comfort
- Nose flange improves the face seal at the nose
- Lightweight cup design resists collapse
The AirWave series is built for easy breathing, lasting comfort, and dependable performance. The exclusive wave design lets in more air, while the FlexFit® moves with your face and stays in place for all-day comfort. The tough Dura-Mesh® shell resists collapse in heat or humidity. The facepiece is naturally contoured without pressure points, with a molded nose bridge and soft foam nose cushion.
The AirWave lasts longer and feels more comfortable to the wearer, boosting workplace compliance and morale, while reducing usage and costs. Experience all-day comfort and breathability with AirWave.
Lower your costs and use fewer respirators. The Dura-Mesh shell protects the filter media, so it stays cleaner for longer. The shell also resists collapsing in hot, humid environments, so the respirator holds its shape longer. The result is fewer respirators used, and lower costs.
Key features:
- NIOSH Approved N95
- MRI SAFE - no metal in the mask whatsoever - will not distort head/neck MRI
- AIRWAVE - increased surface area means lower breathing resistance
- 2 SIZES AVAILABLE for the entire workforce
- 4600 Medium-Large
- 4601 Small
- COLLAPSE-RESISTANT cup shape design
- SOFT FOAM FLANGE and softspun lining for increased comfort
- DURA-MESH exterior keeps hands from touching filter media, helping the respirator to last the entire shift
- BRAIDED STRAPS won't pull hair
- NON LATEX construction
- LOWER YOUR COSTS AND USE FEWER RESPIRATORS The exclusive DURA-MESH SHELL protects the filter media, so it stays cleaner-looking longer. The shell also resists collapsing in hot, humid environments, so the respirator holds its shape longer and the result is fewer respirators used and lower costs.
- EASY COMFORTABLE SEAL The Soft Foam Flange helps to maintain the seal without pressure points, and the pinch free, contoured molded shape means there's no need for a metal nose band to adjust.
- MADE IN AMERICA Quality you can trust.
- SUSTAINABLE SOLUTIONS 100% PVC-Free, like all Moldex products and packaging.
- OTHER STANDARDS: Meets heat and flame resistance in accordance with ANSI/ISEA 110-2009 SECTION 7.11.1.
- Shelf Life: 9 years from date of manufacture
- UPC 092311460109
Packaging
- 10 masks per box (masks not individually wrapped)
- Full case: 100 masks (10 boxes of 10)
Usage
- Make sure the particulate respirators are clean before use
- Never try to clean or sanitize a particulate respirator
- Inspect particulate respirators for scratches or other damage prior to use. Any articulate respirator which shows signs of damage must be discarded.
- Follow Moldex donning instructions
- Dispose after 8 hours of accumulated use (e.g. one 8-hour work shift, or eight 1-hour trips to the store). If the mask is contaminated or damaged replace it with a new one.
- DO NOT use for gases and vapors, oil, aerosols, asbestos, arsenic, cadmium, lead,
4,4-methylene dianiline (MDA), or abrasive blasting (unless physically separated from the blasting) - DO NOT use for particulate concentrations exceeding 10X PEL/OEL
Storage
- Shelf Life: 9 years from the manufacturing date
- Subject to the Storage Conditions specified below, the mask may be used until the expiry date printed on the packaging
- Product should be stored in clean, dry conditions within the temperature range: -20°C to +30°C with a relative humidity of <80%
- Always store the particulate respirators in their original packaging in a cool, dry room in such a way that they cannot be damaged.
- Avoid exposure to direct sunlight
- Do not store the particulate respirators after the indicated expiry date
Useful Links
- Donning and Seal-Check Instructions
- Moldex US Catalog
- Technical datasheet
- Moldex Airwave Brochure
- Warning Insert
WARNING: These respirators help reduce exposures to certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. In Canadian workplaces, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For proper use, see package instructions, or ask supervisor.
Due to safety requirements, we are unable to accept returns on masks or respirators even if unopened. All sales are final.
%20or%20M4621%20(M/L%20black).%0AThe%20Moldex%2046...
){kind=link}
Returns: Due to safety requirements, we are unable to accept returns or exchanges on any health-related items.